Tuesday, March 13, 2018

Kid Boat Camp Out / Musket Cove and Geoff's Birthday - Navadra Island, Yasawa Islands, Fiji - August 2017

Musket Cove Resort and Marina, Malolo Lailai, Mamanuca Island Group 

We motored out of Vuda Point Marina and made our way to Musket Cove marina to meet our friends from SV Tika.  It was a good first stop to test out the new rebuilt engine.  We pushed it hard to ensure that the engine was running smooth with no hiccups.  It was a good 1 1/2 hour - 2 hour motor ride.  It was a nice motor ride and everything was running well!  Wup Wup!

Musket Cove is a resort with a marina in the Mamanuca Island chain close to the main island of Viti Levu.  There are many small islands in the Mamanuca Island chain.  We started from Vuda Point, which is between Lautoka and Nadi on the map below to Malolo Lailai, which is where number 16 is on the map below.  Musket Cove Resort and marine is tucked inside between Malolo Lailai and Malolo islands.  As you can see from the map, there a many resorts in Fiji.  It really is a vacation paradise.


                             Mamanuca Islands map - Fiji Archipelago

Musket Cove will ruin your calibration of what cruising should be.  This place is very welcoming to cruisers, with a yacht club, swimming pool, bar, bbq's, showers and laundry.  It does feel like a little paradise.

Miriam, Geoff and Horatio and Noah at the pool in Musket Cove.

Marina at Musket Cove.  There is also a very large mooring field where we moored.

Geoff with Greer and Russel from SV Tika.

Navadra Island, Yasawa Island Group
We spent the night on a mooring and the next day, made our way up to Navadra Island, which is in the Yasawa Island chain.  The Yasawa's are just north of the Mamanuca Islands.  It is about a 4 hour motor/sail boat ride to Navadra.  You wills sail past many beautiful islands and also many resorts.  Navadra is not listed in the map below as it is uninhabited.  It is the island that is below left of Kuata Island /Waya Island.  There are no resorts and no accommodations or amenities/water, etc.  It was the perfect place to anchor, snorkel, windsurf, sail and of course have a kid boat camp out!
                                   

Kid Boat Camp Out
There ended up being 7 kid boats over the week that showed up for the camp out. It was a great time to catch up with folks that we have not seen in almost a year and also meeting some new kid boats.  SV Tika, SV Pesto, SV Sang Vind, SV Skylark, SV Outer Rim, and SV Lil Explorers all showed up.

Kid boats anchored at Navadra Island

Meet up on the beach

Some excited kids

The adults were kindly asked by the kids to keep separate from them!

Camp fire before the kids camped out

The morning after. We thought the kids were still asleep, but 

they were already hiking on the beach

Sailing and windsurfing in the bay

The ladies art and coffee morning hosted by Greer from SV Tika

SV Pesto with the rock that the kids hiked to and climbed, in the background.

Some boats had to leave and everyone wanted to see a little more, so some separated and some stayed together to discover the Yasawas.

Musket Cove Marina, Malolo Lailai Island, Yasawa Island Group
We decide to head back to Musket Cove as a big wind was predicted for the area so we wanted to be in a more protected place.  Musket Cove is sheltered, but still we felt the effects of 48 knots in the mooring field.  

The morning after the big blow it was still blowing around 30 knots 
and someone decided to kite board in the mooring field!

After the big wind, everyone wanted off the boat, and we 
decide to go for a little hike around the island with our friends from SV Pesto.

View from the backside of the marina

Pineapple fields

not sure what kind of bird this is?

On our way to the organic farm that provides the vegetables for the resort

A very nice farming operation

One of the farmers overseeing the farm

Eggplant, which is very plentiful in Fiji

Bananas

Mangoes

Swiss Chard which they call Silver Beet

Garlic

Chickens

Airstrip 

Walking on the path next to the airstrip.

Geoff celebrating his birthday in Musket Cove marina

Friends joining in for BBQ and cake for Geoff's birthday


Up next:  making our way up the Yasawa Island Group







Vuda Point Marina - Viti Levu, Fiji - June/July 2017

Engine Rebuild
Vuda Point Marina has a couple of options when wanting to haul out your boat.  You can haul out and be placed on the hard stand, where the boat is raised up out of the water to sit on stands on land, so the boat is about 10-20 feet above your head or be placed in a Cyclone Pit.  We chose the cyclone pit as this, we felt, had less of "drop" for removing the engine. Also, we would not have to climb so far up and down to get on and off the boat.  
This also came in handy later, as we re-painted the topsides of the boat, and did not need a ladder!  We could actually stand on the ground and sand and paint without scaffolding.  Score! (well, it seemed like a score considering being in the pit for almost 2 months!)

Enough in the cyclone pit with sun-shading.  It was hot.

First order of business was to get the engine off the boat so we could get it delivered to All Engineering. An engineering shop in Lautoka ( 2nd largest city on the island of Viti Levu).  Geoff tried to remove as much as he could before hand so the engine could actually fit through the compartment hatch.  Lots of winching and lines to get it straight out of the engine compartment and swung over and down off the boat.

Noah guiding the engine down 

Making sure it doesn't drop or hit the boat

Lowering it down onto the truck

Geoff ensuring it sits straight and flat.

Almost there

Ready for delivery to All Engineering in Lautoka  (city about 15 minutes away from Vuda).

After getting it delivered to All Engineering, it was determined that they did not have the correct tools to actually take apart the engine compartment!  Geoff had them bring the engine back and ran to some engineering shops and was able to borrow the right tool and opened it up himself.  He ended up building a work bench himself from scrap wood found around the yard.  He took the engine apart himself and only had the new sleeves sent to All Engineering to be pressed in and honed properly.  

So, this is what was discovered - 
Cracked rings on the pistons and holes.   3 out of 4 looked like this!

Cracked and chipped sleeves.
This was actually a new sleeve that we ordered and was sent to us and ended up being cracked.  We had to wait another 2 weeks for another one to be shipped.  

Horatio learning about re-building an engine

Geoff standing in the engine compartment ready to fit the pan back in. 

The pan was re-epoxied and painted

Geoff cleaned everything up and repainted the case while waiting 
for the sleeves to be pressed in and block to be returned

Looks like a new engine


Ready for the newly re-built engine to go back in

Looks like it will fit 

And down it goes.

From here, Geoff attached everything, nuts, bolts, hoses, etc., back in the right places and ensured everything looked good.
Geoff ran water to the boat and then tried to start the engine.  Success!  It sounded really good also!
After two long months in the pit, it was a relief.  We just needed to actually start sailing/motoring to actually test it under load.  

One of the reasons why we spent two months in Vuda, was the amount of time to get parts shipped. Around 2 weeks for delivery.  Also, we had parts that were damaged and needed to be shipped again.  Geoff also went to S. Korea for work and that was about 3 weeks.  Getting the sleeves put in and honed took another few weeks.  All in all, Geoff said it would have been cheaper and faster to buy a new block and install it himself.  Oh, well, lessons learned.

We did enjoy a weekend away from Vuda while waiting for parts.  We went to Suva, the capitol of Fiji.  It is their largest city and is a main port.  We went to check out the city, but also to see a Fiji rugby match.  We had never seen or been to one, so it was an adventure. We took the bus from Lautoka to Vuda-about 4.5 hours. Nice scenery along the way, sorry, no photos.    In Suva, they have a very large fresh fruit and veggie market.  It was great. All produce is so inexpensive.  You can get a "heap" of eggplant, about 5-8 pieces, for only $2 Fijian dollars, which is $1 US dollar!  Bag of carrots or green beans or tomatoes or cassava or squash for $2 Fijian dollars.  Pineapple and bananas and papaya!
Fiji definitely had more selection and options than Tonga or French Polynesia.

Suva market

So many bananas

Fresh flowers

Opening of Flying Fijian Rugby match

Teams lined up for national anthems

Ready 


Before leaving Vuda, we met up with our friends from SV Be and Be 
and SV Free Spirit for dinner at the Boat Shed restaurant.

SV Free Spirit and SV Be and Be friends

not sure what this bird is called, but the most vibrant bright green

There was a boat being taken apart and having damaged parts put on it.  
It was for a shipwreck movie that was being filmed in Fiji

It was almost sad that they were pretty much taking apart a new boat 
and going to crash it for a movie.

Next up:
After completing the engine rebuild, we were ready to start cruising and seeing the islands.  First was a "kid boat camp out" on Navadra Island in the Yasawa island chain.









Saturday, December 16, 2017


New Zealand to Tonga / Fiji (May – Nov 2017)


Yes, we are woefully behind on our blog.  Since we last posted, we were getting ready to leave New Zealand and sail to Tonga.  As of today (Dec 2017), we are back in New Zealand from Fiji for another cyclone / NZ summer season.  Not sure why it has become difficult to continue to update our blog.  Maybe posting some pictures on Facebook seemed to be enough, but really, it must be that I (Miriam) am lazy.  Some people might think that cruising is just full of cocktails and sunsets.  Sometimes it is like that, but lots of times there is a lot of work involved.  From constant cleaning, cooking, maintenance, and homeschooling, and weather/passage planning/making and boat repairs.  So, in doing all of these things, sometimes the blog gets put aside.  I originally wanted to blog so that we would have something nice to look back upon, especially for the kids.  A nice memento of our time together before they grew up and moved on to their own adventures.  So, back at it.

Whangarei /Marsden Point Marina, New Zealand – May 2017

We had hauled out the boat in April to replace the keel boats and now finalizing our last weeks in Whangarei before getting ready to depart for Fiji.  

Enough getting ready to go back in the water

We had bought a car to travel around NZ and thought we would sell it.  So, we put it up on Trade Me (kind of like Craigslist/eBay).  But after a week, we decided to just keep the car and come back for it next season.  Yes, we were going to come back to NZ!  


The kids spent their last few weeks at a Minecraft camp and went to the beach for the last days of summer.
At North Tec for Minecraft with their friend from SV Jade


Ocean Beach in the Whangarei Heads with SV Jade

Maori good bye performance for cruisers leaving NZ


We moved from Whangarei Marina to Marsden Point Marina as it was closer to the ocean and we could clear with Customs and Immigration.  Just waiting for the right weather window.  Our Visas were due to expire on May 24, and we thought we would have left by then as we originally planned on leaving around the 20th.  Well, a low-pressure system showed up and made our minds up that we were going to wait, which meant extending our Visas for just a little bit longer.  We really only needed to extend for a few days, as we found a window and left on May 26th.

Marsden Point Marina - getting ready for departure

Tonga (not Fiji) here we come - May / June 2017

We left Marsden Point on May 26th and had a ok first night.   A little rolly, but not enough to get seasick over.  By the 2nd day, the weather was great.  Nice easy 15 knot winds on the beam.  But the wind started to die and we ended up having to motor.  We were trying to reach Tonga in time for our friend's son's birthday in Vavau.  We had been to Tonga the season before and really enjoyed it, but was really looking for to it, as we were planning on meeting friends we had not seen since French Polynesia.  SV Pesto and SV Sang Vind and hopefully our friends on SV  Tika as they were possibly heading up from the Ha'apai group in Tonga.  We motored for about 15-20 hours not wanting to get caught in any possible bad weather approaching, but also to just see our friends.  

Sunset from our boat as we made our way to Tonga


Unfortunately, Geoff smelled something bad and then noticed smoke coming out of the engine compartment.  We did not know at the time what was wrong, but knew the engine sounded really bad and would not stop smoking.  The alarms were going off on the boat and it was noisy and smelly.  We had to decide what to do.  We could not look at the engine while under way, so we decided to stop in Minerva Reef to determine what was wrong and if possible, fixing it while at anchor in Minerva Reef.  At least the wind did pick up and we could sail to Minerva Reef.  We ended up anchoring in South Minerva Reef.  We did need to start the engine again to come into the Reef. That was very nerve wracking as we did not know if the engine would fail and we could possibly end up on the reef as the entrance is narrow and the wind was not blowing up into the reef, but to the side.  We made it in and anchored right at sunset. Whew!  Geoff was able to look at the engine the next morning, and made a possible diagnosis that we probably took on bad fuel and now our engine had failed.  With this very sad news, we made the decision to sail to Fiji.  As Tonga has no real boat yard for haul out or any suppliers with parts that could help us repair the engine.  So, we informed our friends via Iridium Mail, that we would be heading to Fiji and would hopefully see them as they made their way to Fiji in the next couple of months.  Sigh...

Location of Minerva Reefs
Minvera Reef, two submerged atolls in the South Pacific south of Tonga and Fiji.   We anchored in South Minerva, the one that looks like an infinity symbol or figure 8.  We anchored in North Minerva the year before as we made our way down from Tonga to New Zealand.

Fiji here we come!

Now, getting to Fiji without an engine.  Hoping the wind would continue to be favorable so that we could sail the whole way.  If there was no wind, we did not have a chance of motoring there.  We waited for a day or two and luckily, the wind was good, 15-20 knots for the next several days.  The last day the wind increased to 30 knots on the nose and getting into the pass to Viti Levu, Fiji's big island, was a challenge.  The winds have a cape effect coming from east to west and really sweep around the corner where the pass entrance is.  We could see the pass, but getting there took several more hours that we had anticipated and it was a bumpy ride.  
We made it into the pass and the wind was nice and calm, 12 knots, so we were able to sail the next couple of hours to the Quarantine buoy of Vuda Marina!  We were so relieved and exhausted.  We were able to come into the marina and get checked in and finally rest!

Viti Levu - the big island of Fiji

The warmest and friendliest greeting from the folks at Vuda Marina. 
What a welcome!

 next post - 2 months in the "pit" for engine repair.